Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
D
C
B
D
C
B
D
C
B
D
C
B
D
NUT2
NUT1
A
A
A
A
20
o
X370 Killer SLI/ac / X370 Killer SLI
Step 3
Move the standoff based on the
module type and length.
The standoff is placed at the nut
location D by default. Skip Step 3 and
4 and go straight to Step 5 if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
35
Werbung
Inhaltsverzeichnis
