INSTALLATION OF THE COOKTOP
Make sure that the distance between the panel and the wall or any
objects is at least 50 mm.
• The panel is certified in class "Y" thermal protection. Ideally, when
installing the panel, a lot of free space should be provided on both
sides. There may be a wall behind, and on one side – a wall or tall
objects. However, on the other side, there should be no walls or
partition walls the height of which exceeds the level at which the panel
is installed.
• Kitchen furniture or the support in which the panel is installed, as well
as the edges of the furniture, laminate flooring, and glue, must
withstand temperatures of up to 100 °C.
• Decorative elements of furniture located near the edge of the panel
must be heat resistant.
• Do not install the cooktop above an unventilated stove or dishwasher.
• In order to ensure proper air circulation, free space (20 mm) under
the cooktop housing should be provided for the electronic
components of the equipment.
• If there is a drawer under the cooktop, do not place flammable or non-
heat-resistant objects and substances (for example, aerosols) in it.
• The materials from which work surfaces (for example, tabletop) are
made often expand when exposed to water. To protect the cutout of
the panel, a layer of varnish or special sealant should be applied.
Special care must be taken when mounting the gasket supplied with
the cooktop to prevent fluid leakage. This gasket guarantees a high-
quality seal when interacting with a smooth surface of the furniture.
www.maunfeld.com
-39-