Chapter 1. Quick Start Guide; Optional Items; Battery Charger; Charging The Battery - Baker Hughes Druck DPI 620 Genii Schnellstart

Chapter 1. Quick Start Guide

1.3 Optional Items

The items that follow are optional items which can be used with the Druck DPI 620G-IS:
• Pressure Module Carrier MC 620-IS: this attaches directly to the DPI 620G-IS to
allow one or two PM 620-IS pressure measurement modules to be installed.
• Pressure Module PM 620-IS and PM 620T-IS: this attaches to the pressure module
carrier (MC 620-IS) or a pressure station (PV 62X-IS) to provide pressure
measurement.
• Pressure Stations PV 62X-IS: these provide pressure generation capabilities and if
the DPI 620G-IS is installed in a pressure station, it becomes a fully integrated
pressure calibrator.

1.4 Battery Charger

3
2
1

1.4.1 Charging the Battery

1. Connect the DC power supply unit in to the +5V DC connection [1] on the side of the
battery charger cradle.
2. Insert the battery [2] into the charger cradle at a slight angle, push and click into
place. Tighten the thumb screws [3] to prevent accidental disconnection.
2 | DPI 620G-IS Safety and Quick Start Guide-English © 2016 Baker Hughes, a GE company – All rights reserved.
4