Targus PA096E Handbuch Seite 7

Troubleshooting
Device Not Working
• Disconnect the adapter from your computer's USB
• Check that your computer is turned on, that is charged
• Make sure that the adapter is firmly connected to both
• Disconnect the device from the adapter, then reconnect
• Verify that you ran the Setup or Install program for the
• Make sure that the device appears in Device Manager.
Verifying Devices are Installed
You can view the devices installed on your computer from
the Device Manager Window in System Properties.
Right-click My Computer, then click Properties,
Hardware tab, and the Device Manager button.
From the Device Manager window expands the Universal
Serial Bus controllers - displays the USB printing
support.
Downloaded from www.Manualslib.com
Targus USB to Parallel Printer Cable
port, then reconnect it.
(if running on a battery) and that the device is plugged
in and turned on (if applicable).
your computer and the device.
it and restart your computer.
device.
For more information refer to the following instructions.
manuals search engine
7