Targus PA096E Handbuch Seite 6

1 Plug the printer cable into the parallel port on the
2 Install the printer software driver according tot he
3 If prompted to select a port, choose USB001 (USB
Checking and Redirecting the Printer
Port Settings
Follow these instructions to check the printer port
settings and redirect your printer from the LPT 1 port to
the USB001 (USB port) on the adapter.
1 With the printer connected to the adapter's parallel
2 Right-click the printer device you are reassigning and
3 In the Printer Properties window, select Details or
4 Change the setting to USB001 (USB port) to redirect
Downloaded from www.Manualslib.com
Targus USB to Parallel Printer Cable
adapter.
instructions that come with the device.
port). If this port does not appear in the list, choose
the LPT1 port, complete the manufacturer's setup for
your printer, and refer to the instructions below to
redirect your printer.
port, select Start, Settings, and then Printers.
select Properties.
Connection for the Printer. (Section titles vary, so
check your printer's user manual for specific
instructions.)
printing to the adapter.
manuals search engine
6