Sony AR6400NBL WEGA Bedienungsanleitung Seite 29

Option Description
AFT Fine-tunes the selected programme number manually if you feel
that a slight tuning adjustment will improve the picture quality.
(Normally, fine tuning is performed automatically.)
1
2
Audio Filter
Improves the sound for individual channels in the case of distortion
in mono broadcasts. Sometimes a non-standard broadcast signal
can cause sound distortion or intermittent sound muting when
watching mono programmes.
1
2
Note
You cannot receive stereo or dual sound when "Low" or "High" is
selected.
Skip Skips unused channels when you press PROG +/– to select
channels. (You can still select a skipped channel using the number
buttons.)
1
2
To restore a skipped channel, select "Off" in step 2.
Decoder Views and records the scrambled channel selected when using a
decoder connected to the Scart socket
or via a VCR.
Note
Depending on the country/region selected for "Country" (page 26), this
option may not be available.
1
2
To cancel this function at a later time, select "Off" in step 2.
After selecting "AFT", press ,.
Press M/m to adjust the fine tuning from –15 to +15,
then press OK twice.
After selecting "Audio Filter", press ,.
Press M/m to select "Low" or "High", then press OK.
If you do not experience any sound distortion, we recommend
that you leave this option set to the factory setting "Off".
After selecting "Skip", press ,.
Press M/m to select "On", then press OK.
After selecting "Decoder", press ,.
Press M/m to select "On", then press OK.
1/ 1 either directly
29
GB