LG MP500-F serie Installation Seite 6

In/Out Cable Connection
Attention
● HDMI kit, HDMI, DP, LINE-OUT, and LAN cables are not included in the basic components. You
need to purchase a cable separately as it is not provided as an accessory.
● After cabling is complete, assign the SET ID of the monitor to be connected to MP500-F***.
● To configure the SET ID, please refer to the owner's manual for your monitor.
Connecting a Monitor with DP Cable
Attention
● To enable DP connection, the monitor that will be connected to MP500-F*** must support the DP
input port.
● When connecting the DP (DisplayPort) cable, use the standard cable. Using a non-standard
cable may cause a malfunction.
1 Connect the appropriate power cables to a monitor and MP500-F*** respectively.
6