Troubleshooting; Remote Controller Guide; Remote Controller Operation - Kerbl Digitale Hängewaage 1000 Bedienungsanleitung

7. Troubleshooting

PROBLEM
No display on power up
Display flashes
Cannot turn on off
Cannot tare
Recharge indicator does not
come on
Unstable display
The display doesn't show "0"
when nothing loaded
Weighing in big error
Can not recharge
Short remote distance

8. Remote controller Operation

• Brightness Option
Operation Illustration
F1 0: no display, 1: Min brightness, 5: Max brightness (Default: 3)
POSSIBLE CAUSE
Battery is damaged
Battery is not connected
Low battery power
OFF/ON key is damaged
TARE key is damaged
Defective recharger
Recharger isn't connected
Load is in motion
Overloaded or defective loadcell
Scale is damp
Loadcell is not ready to work
Improper placement
Improper operation
Defective battery
Defective recharge's connector
Receiver function improperly
SOLUTION
Check the battery
Reconnect the battery
Recharge the battery
Check and clean OFF/ON key
Check and clean TARE key
Check the recharger
Check the plug
Keep the load stable
Wait for 3-5 min after power-on
Keep the scale in dry environment.
Wait for 3-5 min after power-on
Scale should be hung up
Make the hook flexible against off-axis loading.
Replace the battery
Check or replace the connector.
Check and clean the receiver
Replace is battery.
25