Setting The Wash Programme - Maytag NEPTUNE MAH7550AGW Benutzerhandbuch

O
PERATING
S W
ETTING A ASH
If there are no words on the touchscreen, open the door, touch any key (except off), or touch the screen to "wake" the controls.
Press "Start/Pause" or
change your selections below.
fabric
options
cottons
end chime medium
wash temp
60° C
spin speed
1000 rpm
more
programmes
Step 1
Home Screen
immediately start a cycle using the
default wash settings or choose
"More Programmes" for other
types of programmes. If you wish
to modify the wash cycle, the
following variables can be changed:
More Programmes
rinse & spin spin only
automatic dispenser &
machine cleaning
favourites
More Programmes – Select "More Programmes"
to choose between the following four options:
Rinse and Spin (allows up to four rinses)
Spin Only
Automatic Dispenser and Machine Cleaning
Favourites
Step 2
If you are satisfied with the selections,
press the Start/Pause touchpad to begin
the programme.
As you use the touchscreen, if
you feel you are lost, press
Back or Home.
NOTE: Not all Wash Temps, Spin Speeds,
and options will be available for the various
fabric selections. Some will appear "greyed
out."
Downloaded from www.Manualslib.com
I
NSTRUCTIONS CONT
P
ROGRAMME
Press "Start/Pause" or
change your selections below.
fabrics
cottons
cottons
wash temp
60°C
delicates/
synthetics
spin speed
1000 rpm
quick wash
more
programmes
Fabrics – Select "Fabric" to
select the appropriate fabric
– You may
setting.
manuals search engine
.
change your selections below.
Fabric fabrics
options
cottons
reduced
program chime med.
ironing wash temp
60°C
woollens
spin speed
1000 rpm
more
programmes
Wash Temp – Select
"Wash Temp" to select
the
temperature.
Options
pre-soak
on off
pre-wash
on off
extra rinse
on off
continue
Options – This has two screens that has many different options which can
be toggled on and off. To access the additional screen press the arrow key
in the upper right corner of the screen. Press "Continue" to return to
the review screen. Below is a table showing all the options and a brief
description of each one.
Options
Add a Pre-wash Adds a pre-wash. The Pre-wash compartment is flushed during this
step, followed by the main wash compartment during the main wash.
Add a Pre-soak period Adds a standing soaking period of 15 minutes before the main
programme sequence starts.
Add Extra Rinse Adds an extra rinse at the end of the normal programme's rinse
sequence, and just before the final spin.
No Final Spin Will not advance the programme into a final spin. Clothes load will be
wet at the end of the programme.
Economy Limits all wash fills to "Low" and rinse fills to "Medium" and limits the
wash water temperature to 40C regardless of selection. Cancels Pre-
wash if chosen.
1/2 Load Reduces water levels by one setting from "Medium" to "Low" and/or
from "High" to "Medium".
Remind Chime Chimes at the end of the programme, every 5 minutes for up to
2 hours.
End Chime Chimes once when wash programme is complete.
Short Programme Shortens programme time.
Delay Wash Sets the machine to start at a predetermined delay time set by the user.
Delay can be set up to 12 hours and 45 minutes, in 15 minute increments.
7
Press "Start/Pause" or
Wash Temp.
options
program chime med.
cold
30 °C 40 °C
50 °C
60 °C
Spin Speed – Select "Spin
Speed"
appropriate wash
appropriate spin speed.
final spin
remind chime
on off
on
economy
on off
delay wash
on
1/2 load
on off
Description
Press "Start/Pause" or
change your selections below.
Spin Speed
fabrics
options
cottons
program chime med.
500 rpm 800 rpm
wash temp
60°C
600 rpm 900 rpm
spin speed
1000 rpm
700 rpm
1000 rpm
more
programmes
to select the
Options
end chime
off
medium
short programme
off
on off
continue