Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
should also take into account that the thicker
and smoother the bottom the less power is used
for cooking.
•
Insert the plug into the mains socket, the
«-L-» symbols will appear on the display (4).
•
Press the button (9), the light indicators of
the buttons (8) and (7) will light up and the
«-L-» symbols will appear on the display (4).
To select the operating mode press the cor-
responding buttons.
Note: If there are no operations within 30 sec-
onds, the unit switches to the standby mode,
and «-L-» symbols will appear on the display (4).
•
To select the required power level press
the button (8), the power level symbols will
appear on the display (4) (P5 by default).
Press the buttons (5) «–» «+» to select the
power level from 1 to 10, the power level
symbols will be shown on the display (4)
(from P1 to P10).
•
To select the heating temperature press the
button (7), the cooking temperature value will
appear on the display (4) (+120 °С by default).
Use the buttons (5) «–» «+» to set the heat-
ing temperature (60, 80, 100 ... 240 °С), the
selected temperature will be shown on the
display (4).
•
The timer mode allows to set the unit opera-
tion time from 1 to 180 minutes. Before set-
ting the operation time select the desired
power level (using the buttons (8) and (5)) or
the heating temperature (using the buttons
(7) and (5)). After that press the buttons (5)
«-» «+» to set the unit operation time from 1 to
180 minutes.
•
To switch the unit off press the button (9),
wait until the fan stops operating and unplug
the unit.
Notes:
If error symbols («Е01», «Е02»...) appear on the
display (4), check the following parameters:
the mains voltage (whether it corresponds to
–
the voltage specified on the unit body).
the correct and safe connection of power
–
plug (it may be not properly inserted into the
socket).
the cookware used is suitable for induction
–
cooker; make sure that the cookware bottom
diameter is more than 12 cm.
If error symbols are still shown on the display,
apply to the authorized service center.
MW-1927.indd 9
Overheat protection
For your safety the unit is equipped with overheat
protection system. If the heated cookware is
empty, the overheat protection system will switch
off the unit automatically. If you remove the cook-
ware from the cooker during cooking, the unit will
be switched off automatically.
If you have put a not suitable cookware on the
cooker or switched the unit on without cookware,
a sound signal will be played every 2.5 seconds
and the unit will be turned off automatically after
50 seconds; symbols «-L-» will appear on the
display (4).
CLEANING AND CARE
Never immerse the unit into water or other
liquids.
•
Clean the cooker's operating surface regu-
larly.
•
Unplug the unit and let it cool down.
•
Do not use abrasive cleaners for cleaning
the operating surface, use non-abrasive soft
cleaners put on a sponge or on a soft cloth.
STORAGE
•
Clean the unit before taking it away for
storage.
•
Wind the power cord.
•
Keep the unit away from children in a dry
cool place.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Power consumption: 2000 W
Hob diameter: 260 mm
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
9
ENGLISH
17.08.2015 12:19:49
Werbung
Inhaltsverzeichnis
