Inhaltsverzeichnis
Werbung
SPRAY GUN
INTENDED USE
The power tool is only intended for atomising solvent-based and water-dilutable lacquers, glazes, primers, clear lacquers,
automotive top coats, wood stains and oils.
The power tool is not suitable for use with dispersion a nd latex paints, caustic solutions, acidic coating materials, spray material
containing grains or solids, and spatter and drip resistant materials.
TECHNICAL SPECIFICATIONS
Model
Rated Voltage
Rated power
Spray flow
NOISE/VIBRATION INFORMATION
●
The vibration level given in this information sheet has been measured in a ccordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or i s poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify
additional safety measures to protect the operator from the effects of vibration such as: maintain the tool a nd the accessories,
keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Read the manual.
Wear eye protection
Electrical appliances must not be
disposed of with the domestic waste.
PRODUCT ELEMENTS
1
2
3
4
5
6
7
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
SG06-800
230-240VAC / 50Hz
550W
350ml/min
Air filter cover
SDS lock knob
Cable
Handle
Spray shape adjust knob
Air cap
Spray mouth
Max. Viscosity
Tank capacity
Pull out mains plug im mediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Wear ear protection.
Wear breathing protection
Protection class II
8
Thumbwheel for spraying capacity
9
Spray trigger
10
Vent cover
11
Spray material tank
12
DIN cup
13
Clean needle
●
Keep work area clean and well lit. Cluttered or dark
areasinvite accidents.
●
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
ordust. Power tools create sparks which may ignite the
dust or fumes.
●
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
●
Power tool plugs must match the outlet. Never modify
80 DIN
800ml
4
Werbung
Inhaltsverzeichnis
