Phocos CIS-N-MPPT-LED 85/15 Betriebsanleitung Seite 21

LED indications & warning functions
LED
All LEDs
LED Driver Description
•
Output voltage up to 69 V
•
Nominal output current: 350~3500 mA
•
Two timers inside to control LED brightness
Output base level
The CIS-N-MPPT-LED 85/15 base output current can be adjusted via MXI-IR interface and CISCOM software. The CIS-N-MPPT-LED 85/15 base output current
is adjustable between 350 mA and 3500 mA.
Nightlight Function
The CIS-N-MPPT-LED 85/15 controller comes with a sophisticated nightlight function. It controls the load output at night and also is widely programmable.
3 operating modes are available: Standard Controller, Dusk to Dawn and Evening/Morning.
www.phocos.com
Status
On
Flash
Off
On
Off
On
Flash
Off
Green->Red->Green->
Function
Controller connected to battery, night detected
Controller connected to battery, day detected
No battery connected
Charging failure (overvoltage / overcurrent)
Charging OK
Load low/high voltage disconnect (LVD/HVD)
Load overcurrent
Load OK
Programming
2 0 | P a g e