Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Press the button on the handle to activa-
te the heating. Then move the induction
head back and forth as required
Switch off the machine at the main
switch after fi nishing the work.
19. Replacement of the ferrite core
The ferrite core must be replaced if it is
worn out.
Remove the screw connection and remo-
ve the ferrite core. Clean the copper
lines, replace the ferrite core and screw
it tight.
Attention:
The induction head must only be
replaced by personnel explicitly au-
thorised to do so and only after the
power supply to the machine has
been disconnected.
WWW.TOOL-IS.COM
37
Werbung
