Cleaning And Maintenance - Heinner HCM-900RBK Bedienungsanleitung

www.heinner.com 900W, 220-240V~50/60Hz
VIII. CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning and let the appliance cool
down completely. To protect against electrical shock, do not immerse cord, plug or
unit in water or liquid.
1. Clean all detachable parts such as inner cover, brewing basket, water tank etc with
warm water and the small brush at one end of spoon after each use.
2. Push the anti-drip valve upwards for 3-4 times to empty the residual water.
3. Wipe external surface of product with a soft, damp cloth to remove stains.
4. Water droplets may buildup in the area above the brewing basket and drip onto the
product base during brewing. To control the dripping, wipe off the area with a clean,
dry cloth after each use of the product.
5. Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, periodically you should clean away the
mineral deposits left by the water according to the water quality in your area and the
use frequency, we recommend removing mineral deposits as follows:
1. Fill the tank with water and descaler to the max level as indicated on the water tank
(the scale of water and descaler is 4:1, the detail refers to the instruction of descaler.
Please use "household descaler"), you may also use the citric acid instead of the
descaler (the one hundred parts of water and three parts of citric acid).
2. Insert glass carafe onto the warming plate.
3. Make sure without coffee powder and brewing basket are assembled in place.
4. Switch on the appliance and allow it to "brew" de-scaling solution.
5. After "brew" one-cup solution, switch off the appliance.
6. Leave the solution stay for 15 minutes and repeat step 3-5.
7. Switch on the appliance and run off the solution until the water tank is completely
empty.
8. Rinse by operating the appliance with water at least 3 times.