Herunterladen Inhalt Inhalt Diese Seite drucken

Heinner HCM-900RBK Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 58
www.heinner.com
900W, 220-240V~50/60Hz
9. Remove glass carafe to serve when finish brewing. For an optimum coffee taste, serve
it just after brewing.
NOTE: The coffee you get will be less than the water you have added as some water is
absorbed by coffee powder.
CAUTION: When pour coffee, the momentary inclined angle of glass carafe shall not be
more than 45 degree from the vertical position, you shall pour the coffee slowly until
the glass carafe is empty, otherwise the coffee in the glass carafe will rush to the bottom
of carafe lid, and the coffee will flow out from two edges of lid and hurt person!
10. After finish brewing, you must firstly open the top lid and then close it again before
go into next cycle.
11. Always turn the coffee maker off and unplug the appliance when not in use.
BREW COFFEE WITH COFFEE BEAN
1. Open the top lid and fill the water tank with some drinking water.
NOTE: Do not fill water tank with water to exceed max level as indicated on the water
tank
The appliance can brew max 4 cups of coffee every brewing cycle.
2. Place the brewing basket into grinding cavity and make sure the brewing basket is
assembled in place.
3. Add proper coffee bean into brewing basket, and then replace the top lid.
NOTE:
1) Usually a cup or two cups of coffee needs three spoons of coffee beans or coffee
powder, three cups of coffee needs five spoons of coffee beans or coffee powder, and
four cups of coffee needs six spoons of coffee beans or coffee powder.
2) The appliance will not work unless the top lid is closed well in position.
4. Insert glass carafe in place onto warming plate horizontally, ensure center line of glass
carafe aligns with anti-drip valve.
5. Connect the appliance with power source, the indicator of "ON/OFF" button
illuminates in green.
WARNING: The control knob must point to "Stop" position before plug in.
6. Turn the control knob to "Coarse grind" or "Fine Grind" position based on your
demand, and then press down the "ON/OFF" button, the appliance starts to run and
grind coffee bean based on the selected setting, at that time, the indicator of "ON/OFF"
button turns into red.
WARNING: Do not open the top lid during brewing process to avoid being scalded.
NOTE: During brewing process, you can press the "ON/OFF" button again if you want to
make the appliance stop working. But it is better not to make the appliance stop
working during brewing process.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis