Troubleshooting - Climadiff CLS12H Gebrauchsanweisung

7. TROUBLESHOOTING

You can solve many common cooler problems easily, saving you the cost of a possible service call. Try
the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
Cooler does not operate
Cooler is not cold enough
The light does not work
The cooler seems to make
too much noise
The door will not close
properly
Vibrations
The control board doesn't
work
Display error on screen

Not plugged in

The appliance is turned off

The circuit breaker tripped or a blown fuse

Check the temperature control setting

The ambient temperature requires a temperature readjustment

External environment may require a higher setting

If the ambient temperature is > 25 ° C, your appliance can only cool
down by 10°C below the ambient temperature.

The door is opened too often

The door is not closed completely

The door gasket does not seal properly

Not plugged in

The circuit breaker tripped or a blown fuse

The bulb has burned out

The light switch is "OFF": press the "light" button to activate the
function

Contact you after sales service

The rattling noise may come from the flow of the refrigerant, which
is normal

As each cycle ends, you may hear gurgling sounds caused by the
flow of refrigerant in your cooler

Contraction and expansion of the inside walls may cause popping
and crackling noises

The cooler is not level

Check that the shelves are correctly installed

The cooler is not level

The door was reversed and not properly installed

The gasket is dirty

The shelves are out of position

Check to assure that the cooler is level

The control panel is down

Problem with printed circuit boards

Problem with power supply

Contact your after sales service

Poor screen quality

Temperature value does not appear
19
POSSIBLE CAUSE