D-Link DWR-933 Installationsanleitung Seite 6

CoNNECT YouR DEViCE - ViA uSb CAbLE
Step 1:
Turn on the DWR-933 by pressing and holding the
power button until the "Welcome" message appears on
the display.
Step 2:
Connect the DWR-933 to your PC using the USB cable.
The device should install automatically on modern
operating systems.
Step 3:
Use a web browser to go to 192.168.0.1 to log in to the
configuration interface. The default username is admin,
and the password should be left blank.
Step 4:
Use the on-screen the menus to configure the device.
DWR-933
4