Product Setup; Quick Installation - D-Link DWR-933 Installationsanleitung

PRODuCT SETuP

QuiCK iNSTALLATioN

Step 1:
Lift off the back cover by using the notch on the bottom.
Step 2:
Remove the battery using the notch along the top edge
of the battery bay
Step 3:
Slide the micro-SIM card bracket to the left until it clicks
to unlock it, then lift it open. Place your micro-SIM card
SIM
in the tray with the notch situated at the top-right, then
close the bracket and slide it to the right until it clicks to
lock it in place.
Step 4:
If you want to insert a microSD card, push the microSD
SD
card bracket down until it clicks, then lift it open. Place
the microSD card in the indentation, then close the
bracket and slide it up until it clicks to lock it in place.
Step 5:
Reinsert the battery and reattach the battery cover.
Step 6:
Connect the USB cable and plug it into the USB port of
a power adapter or a PC to charge the battery.
DWR-933
2