Toshiba TECRA S3 Installation Seite 5

TOSHIBA Bluetooth Module Installation
11. Disconnect the keyboard ribbon cable and remove the keyboard.
Keyboard ribbon cable
Keyboard
Figure 4: Removing the keyboard
12. Disconnect the touch pad cable.
13. Remove the touch pad assembly while releasing the latches on both
sides of it.
Touch pad cable
Touch pad assembly
Figure 5: Removing the touch pad assembly
14. Connect the antenna cable to the Bluetooth module.
15. Connect the other end of the flexible cable to the Bluetooth module.
16. Connect one end of the flexible cable to the connector on the computer.
17. Seat the Bluetooth module.
18. Pass the antenna cable to the slit.
GB-3