Toshiba TECRA S3 Installation Seite 4

8. Lift up the back of the keyboard while releasing the three latches, rotate
it toward you and lay it face down on the palm rest.
When you move the keyboard forward, do not touch the keys. Doing so
could cause misalignment. Hold the keyboard by the sides and lay it gently
on the palm rest.
The keyboard is connected to the computer by the keyboard ribbon cable.
Be careful not to apply tension to this cable when you lift up the keyboard.
9. Remove one screw securing the keyboard support plate.
10. Peel off the adhered portion (adhered to the CPU holder) of the
keyboard support plate, and slid to remove it.
GB-2
Figure 2: Rotating the keyboard
Figure 3: Removing the keyboard support plate
TOSHIBA Bluetooth Module Installation
Keyboard
Screw
Keyboard support plate