OneOdio A10 Bedienungsanleitung Seite 4

Functions
Easy Pairing
1. Hold Power Button for 3 seconds to turn on the
headphones, and then the device enter paring mode.
2. Keep the headphones and your Bluetooth device as close
as possible during the pairing process.
3. Turn on Bluetooth function of your Bluetooth device.
Search headphones' Bluetooth signal on your Bluetooth
device, and select "A10" to pair it with your Bluetooth
device. The Indicator Light slowly flashes blue when the
headphones pair successfully.
4. lf you are asked for the Password/PIN code during the
pairing procedure, enter "0000" (four zeros).
Pair to The Second Bluetooth Device
1. Make sure the headphones have been connected to the
first Bluetooth device successfully. And the headphones are
not playing music.
2. Turn off the first device's Bluetooth.
3. Turn on the second device's Bluetooth, find the "A10"
model name and select it to pair with your device.
4. Turn on the first device's Bluetooth and select "A10" pair
it again.
5
NOTE: OneOdio A10 only has one audio channel, if you
want to play music from another Bluetooth device, please
pause the current device's music first.
ANC-Active Noise Cancelling :
Turn On ANC: Press the ANC Button and the ANC
Indicator light on green.
Turn Off ANC: Press the ANC Button and the ANC
Indicator turns off.
AUX Wired Connection:
The headphones supports AUX input for wired external
audio source connection. Simply Power Off the headphones
and plug in the audio cable.
NOTE: The buttons and microphone on OneOdio A10 will
not work when connected as wired headphones.
6