Targus ACB10EU Bedienungsanleitung Seite 5

Targus USB Bluetooth
For Windows Vista
1 Insert the driver software CD into your computer's CDROM drive.
2 If setup does not begin automatically, click Start, Run, then enter
D:\setup.exe (where D: is the path of your disc drive) and then click
OK.
3 The installation screen will appear and choose Window's version
(Windows Vista) on the setup screen. Click Next.
NOTE: FOR WINDOWS VISTA USERS, A "USER ACCOUNT CONTROL" WINDOW
APPEARS, PLEASE CLICK THE "ALLOW" BUTTON.
4 The "No Bluetooth device was detected" window appears.
Insert the USB Bluetooth adapter in the USB port.
5 Follow the on-screen instructions.
6 Click Next.
7 Click Finish.
YOU CAN ALSO DOWNLOAD THE LATEST DRIVER FROM:
http://www.broadcom.com/products/bluetooth_update.php
Verifying the Adapter is Installed
After installing the adapter software (for 2000/XP):
1 Click Start/Settings/Control Panel/System/Hardware/ Device
Manager.
2 Check under 'Bluetooth Devices' that a 'Broadcom 2045
Bluetooth 2.0 USB-UHE device / USB device" is installed.
After installing the adapter software (for Vista):
1 Click Start/Control Panel/Hardware/Device Manager.
2 Check under 'Bluetooth Radios' that a 'Broadcom 2045 Bluetooth
2.0 USB-UHE device / USB device" is installed.
If the information is not present:
1 Unplug the adapter
2 Plug the adapter into the USB port to initiate the driver. Verify that
the adapter is installed.
You are now ready to configure the Bluetooth.
®
2.0 Adapter with EDR
4