Inhaltsverzeichnis
Werbung
AUFTAUEN NACH ZEIT
Während des Auftauprozesses gibt der Herd Piep-Signale ab, um Sie daran zu erinnern,
die aufzutauende Speise zu prüfen. Wenn der Herd dieses Signal gibt, öffnen Sie die Tür, drehen Sie die Speise um und schließen Sie
die Tür; drücken Sie den Knopf START/Speedy Cook.
1. Turn the Menu Dial Knob to set AUTO DEFROST.
AUTO DEFROST LED LAMP lights.
2. Turn the control dial knob
to set "0 g" in display.
3. Press the Selection button(
)
4. Turn the control dial knob
to set the cooking time
(example : 11minutes)
5. Press the Start/Speedy Cook button
6. The oven will beep, open the door, turn the frozen food over
and close the door, press the Start/Speedy Cook button
again.
7. "End" shows in display and beep sounds when the cooking is
completed.
WARNING :
The temperature inside the oven and window is very high.
Do not touch the oven window and metallic interior of the oven when taking
food in and out.
Use thick oven gloves while handling food or accessories.
Note : • By pressing the check button ,You can check the setting cooking
menu while the cooking is in progress
• When first using the oven ,,smoke and odor will be given off
To avoid this happening when food is being cooked,operate the
oven with the setting "convection 250 ºC" without food for
approximately 10 minutes
• The cooling fan may operate for 2~5 minutes after cooking for the
safety The display will show "COOL"and ":0 or clock"
17
.
Werbung
Inhaltsverzeichnis
