Whispbar K563W Montageanleitung Seite 7

EN
Fitting Kit
K563W
Make sure the pad fits into the holes
underneath the foot.
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Please check the rear of this manual for
information relating specifically to your
vehicle.
Clamps directly to edge of roof under the
doors, pin locates in hole on vehicle
Locate vehicle's fixed points.
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
7