Viessmann 92890 Bedienungsanleitung Seite 4

3. Mounting
Caution:
Resistor and diode at the cables are needed for proper
function of the lamp. Never cut them off!
Never cover resistor or diode with insulation material,
because they have to be cooled by surrounding air!
- Remove the luminaire carefully from the package.
- Check function before mounting.
- Drill a hole (Ø 5,5 mm) at the mounting place. Diameter see
fig. 1.
- Put the cables from above through the hole and push the
socket into the hole. If needed, fix the lamp with the fixation
ring from below.
4. Connection
Connect the LED-lamp to the lighting power output of a model
railroad transformer (e. g. item-No. 5200) or power supply as
shown in fig. 3 and / or 4.
DC voltage: Connect the diode (red part with black mark)
with the plus pole of the power supply.
AC voltage: Operation with AC voltage could cause some
flickering. We recommend to use the Viessmann power
module item-No. 5215 (fig. 4) which is sufficient for approx.
100 LEDs. Connect the cable to the diode with the brown
output socket (fig. 3).
5. Technical data
Operating voltage: 14 - 24 V AC~ or DC=
Operating current: approx. 10 mA
Die aktuelle Version der Anleitung finden Sie auf der
Viessmann-Homepage unter der Artikelnummer.
The latest version of the manual can be looked up at
the Viessmann homepage using the item-No.
4
14 - 16 V AC~ with 5215 Power module
13 - 24 V Digital signal
Viessmann
Modellspielwaren GmbH
Am Bahnhof 1
D - 35116 Hatzfeld (Eder)
www.viessmann-modell.de
92890
Stand 04/sw
10/2014
Ho/Me