Cleaning; Servicing - Briggs & Stratton 883251 Anweisungen

Cleaning

To prevent serious personal injury, unplug the charger and remove the battery from
the charger or product before servicing, cleaning, or removing debris.
• Use a dry cloth, brush or vacuum to remove dirt, grease, oil or other debris
before and after each use.
• Do not use any strong detergents on the plastic housing or the handle. They
can be damaged by certain aromatic oils such as pine and lemon, and by
solvents such as kerosene.
• Moisture can cause a shock hazard. Wipe off any moisture with a soft dry
cloth immediately.
• Use a small brush or the air discharge of a small vacuum cleaner to clean the
air vents, terminals and connector on the battery, charger and product.
• Keep the air vents free of obstructions.
WARNING
Do not use solvents, strong detergents, certain aromatic oils such as pine and
lemon when cleaning plastic parts. Many plastics are susceptible to damage from
various types of chemicals and may be damaged by their use. When servicing use
only identical replacement parts. Use of any other parts can create a hazard or
cause product damage.
Service
Servicing requires extreme care and knowledge and should be performed only by a
qualified service technician. For service we suggest you return the product to your nearest
authorized service centre for repair. When servicing, use only genuine replacement parts.
• Keep the handles dry, clean, and free of oil and grease.
• In order to reduce the risk of fire, keep the motor free of grass, leaves, and debris build-
up.
• Never tamper with safety devices. Check them regularly for proper operation.
NOTE: Refer to warranty card supplied with this product for service contact details.
9 9