Attaching Adapter Plate To Display With Vesa 200 Or 200 X 100 Mounting Pattern - peerless-AV SmartMount ST632P Anbringung Und Zusammenbau

Attaching Adapter Plate to Display with VESA 200 or 200 x 100 Mounting Pattern

NOTE: For VESA 75 mm and 100 mm patterns, see
following page.
Attach hook bracket (A) onto adapter plate (C)
2
using four M5 x 6 mm screws (I) and #10 washers
(J) as shown.
C
A
J
I
FOR VESA 200 MOUNTING PATTERN USING
M4 SCREWS:
Attach adapter plate (C) to back of display with four
M4 screws (E) using hole pattern shown below.
C
E
FOR VESA 200 x 100 MOUNTING PATTERN:
3
Choose hole pattern as shown below. Attach
adapter plate (C) to back of display using four
M4 or M6 screws (E, F, G) as shown below.
C
E, F, G
• If screws don't get three complete turns in the
display inserts or if screws bottom out and bracket is
still not tightly secured, damage may occur to display
or product may fail.
FOR VESA 200 MOUNTING PATTERN USING
M6 OR M8 SCREWS:
Attach adapter plate (C) to back of display with four M6
or M8 screws (F, G, H) using hole pattern shown below.
C
F, G, H
6 of 34
ISSUED: 05-11-05 SHEET #: 201-9476-11 08-05-11
WARNING