Thank you for selecting the TTS 300 Translation-Tourguide-System from beyerdynamic.
Please take some time to read carefully through this manual before using the products.
1. Application
The TTS 300 is suitable for all tours, multilingual meetings or simultaneous translations.
The number of participants is unlimited. Multilingual tours can take place at the same time
without any interferences, as the TTS 300 has 16 selectable frequencies. Therefore, up to 16
groups can be informed in up to 16 different languages.
These 16 frequencies are available in two groups; each with 8 frequencies (1 - 8, A - H) that
can be operated simultaneously.
2. Safety Information
•
Never dismantle a device yourself. This must only be done by qualified service peronnel.
Dismantling a device yourself will invalidate the guarantee.
•
Always disconnect the charging device from AC power when you wish to change
connections or move the device to a different place.
•
Keep the devices away from central heating radiators and electric heaters. Never store
them in direct sunlight.
•
Use the devices in dry rooms only.
•
Avoid permanent contact of the transmitter's charging contacts to the skin.
•
Use a damp cloth for cleaning the devices. Do not use any cleansing agents or solvent
cleansers.
3. FE 316 Receiver
3.1 Controls and Indicators
(1)
(1) Headphone socket (mini jack)
(2) ON/OFF and volume control
(3) Operating control LED
(4) Channel selector switch
26
(2)
(3)
(4)