Tecsis S5400 Betriebsanleitung Seite 31

Switching outputs
• Switching function
• Switching rating
• Adjustment
- Set Point
- Reset point
Analogue output
Signal
Load resistance
Display
Accuracy
Reproducibility
Electrical connection
Temperature range
Storage
Ambient
Tk
EMV to IEC /
EN 61 326
Protection class
Weight
Betriebsanleitung / Operating manual / Instructions de service / Instrucciones de uso
adjustable normally closed (NC) or normally open (NO) contact
100mA per switching output
Programmable via the display
0.1° steps withhin temperature range
0.1° steps from beginning temperature range until max. set point –0.1°
4...20mA; 2-wire, programmable in 0,1° steps,
span at least 20% of the temperature range
Dependent on the supply voltage; the relevant formula is
4-digit 7-segment LED display, red, 7.6mm high
Switching output, analogue output and Display:
Accuracy of PT100 + 0,25% of the temperature range
0,05%
Round connector M12x1; 4-pin gold-plated contacts
-30...+80°C
-25...+70°C
0,1% of measurement range per 10K
IEC 61000/4/2 ESD: B
IEC 61000/4/3 HF radiated: A
IEC 61000/4/4 Burst: A
IEC 61000/4/5 Surge: A
IEC 61000/4/6 HF mains borne: A
IP65 according IEC 529
ca. 0,3kg depending on stem
GB
−
=
U 7
V
Supply
R
, 0 022 A
31