Tecsis S5400 Betriebsanleitung Seite 26

Parameter description / programming
With two switching outputs
Degree Celsius
Degree Fahrenheit
Switch 1, Set Point
Switch 1, Reset Point
Contact 1
normally open
normally closed
Switch 2, Set Point
Switch 2, Reset Point
Contact 2
normally open
normally closed
Store
1) The pressure units setting applies immediately for the switching point settings, the reset points
and for the process pressure 4-digit LED display.
26 Betriebsanleitung / Operating manual / Instructions de service / Instrucciones de uso
Temperature units
Select set point for first switch
Select reset point for first switch
Select contact function for first switch
Select normally open contact
Select normally closed contact
Select set point for second switch
Select reset point for second switch
Select contact function for second switch
Select normally open contact
Select normally closed contact
The previous changes are only accepted if button 2 is
pressed about 15 seconds after the previous button press!
GB