Herunterladen Diese Seite drucken

Istruzioni Per L'uso; Use Instructions - ORMA Leader 63 Handbuch

Werbung

ISTRUZIONI PER L'USO

BEDIENUNGSANLEITUNGEN
L'irrigatore è fornito di manico per il traino manuale. Bloccare il manico con viti e pomoli in dotazione.
The irrigator has the handle to manual transport. Stop the handel with the screws and knobs together the
irrigator.
Der Beregnungswagen wird mit einen Henkel für die Hand-beförderung geliefert. Den Henkel in
Transportstellung zu blockieren.
Le Leader est livré avec un manche pour la traction manuelle. Par le boulon fileté, bloquer le manche en
position de traction.
2.
Rimuovere l'arpione. Premere il tastatore di
arresto verso il telaio della macchina per mettere a
folle la scatola ingranaggi.
Disengage brake lever and put the gearbox lever
near the machine frame to take the gearbox
Den Fanghaken entfernen und den Reduktorhebel im
Leerlaufstellen. Drucken die Stange an die Maschine.
Déplacer le cliquet et positionner le levier du carter
d'engrenages sur le poin indiquè par "O".

USE INSTRUCTIONS

INSTRUCTIONS POUR L'USAGE
1.
Posizionare la macchine nella posizione
desiderata frontalmente l'area che si vuole
irrigare. Assicurarsi che le staffe di ancoraggio del
telaio siano piantate fermamente al terreno.
Push the machine to the desired location. Position
the sprinkler trolley facing the direction that will be
irrigated. Secure in position planting lugs firmly
into the ground.
Das Gerät an Anfang der zu beregnenden Fäche
abstellen. Beachten Sie, daß die Stütze am
Boden befestigt sind.
L'arroseur doit être placé en face à la surface qui
doit être arrosé. S'assurer que les brides soivent
bien planté dans le terrain.
free.
ATTENZIONE: La mancata messa a folle della
scatola ingranaggi prima dello svolgimento del
tubo provoca danni alla stessa.
ATTENTION: If you do not put in neutral position
the gearbox before unwinding the hose, you may
cause damages to the gearbox.
ACHTUNG: Der Reduktor wird beschadigt, im
Leerlauf Stellung nicht zuerst Schaluch entrollen
wird.
ATTENTION. Si on ne met pas au point mort le
reducteur, avant le déroulement, on endommage
le reducteur .

Werbung

loading