Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. INSTALLATION
3.1 Unpacking
The scales come with
√
Indicator with bracket and 2 screws
√
Weighing platform
√
Stainless steel hood
√
Power supply module
√
Batteries (4 x 1.5V)
√
Instruction manual
3.2 Locating
> The scale should not be placed in a location that will reduce the accuracy.
> Avoid extremes of temperature.
Do not place the scale in direct sunlight, open windows, or near air conditioning vents.
>
>
Avoid unsuitable surfaces. The table or floor should be rigid and free from vibration.
>
Avoid unstable power sources.
>
Do not use the scale near large users of electricity.
>
Do not place the scale near vibrating machinery.
>
Avoid high humidity that might cause condensation.
>
Avoid direct contact with water, e.g. by immersion or spraying.
>
Avoid air movement such as from fans or opening doors.
>
Keep the scales clean.
>
Do not stack material on the scales when they are not in use.
3.3 Setting up
NOTE: When moving the scale, take care to prevent bending of the cable and connector too much as over a
period of time this can weaken the wires in the connector and cause malfunction.
11
Werbung
Kapitel
Inhaltsverzeichnis
