User Mode Settings - CIAT BOX TRI Eco+ Handbuch

No. Description
Operating mode
Used to set the control
box's operating mode
00 00
Override:
Allows the user to override
the control mode being
01 used used
01
Temperature setpoint in
WINTER mode
02
Temperature setpoint in p p
SUMMER mode
03
Ventilation:
Used for overriding the air
speeds of the
HELIOTHERME units
04
Unit -
Min. -
Max. Max. -
Default WintEr
Increment -
Unit -
Min. -
Max Max. -
Default CFt
Increment -
Unit °C
Min. 0
Setting 03 S tti 03
Max.
– 0.2°C
Default 18
Increment 0.2
Unit °C
Setting 02 g
Min. Mi
+ 0.2°C
Max. 51
Default 18
Increment 0.2
Unit -
Min. -
Max. -
Default AUTO
Increment -
10
VII / USER SETTINGS:
Possible choices
WintEr (used for heating)
SuMMEr (used for cooling)
Auto (reversible), usable only if the optional
changeover thermostat is fitted to the coil s main changeover thermostat is fitted to the coil's main
supply pipe. It will automatically enable WINTER or
SUMMER mode, depending on the temperature of the
fluid.
Off
CFt (Comfort)
ECO (Economy) ECO (Economy)
H.GL (Frost Protection)
tiMe (depending on time schedule)
0 to 51°C
0 to 51°C
Auto (LS or HS selected based on the difference
between the temperature setpoint entered (WINTER
or SUMMER) and the indoor temperature measured).
SPeedL (3-ph motor low speed)
SPeedH (3-ph motor high speed)
If a speed is overridden, the duration of the override is
set by parameter 27.