LEXIBOOK RCD200DC Bedienungsanleitung Seite 28

TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
While in CD Stop mode, press the PROG.
button; "PROG" and "1" (the program number)
will blink on the LCD display and "01"
(the program number) will blink.
3
Press the PLAY/PAUSE
programmed playback. Adjust the VOLUME
control as desired.
NOTES:
• Programming is the ability to preselect the order in which a series of tracks will be played.
• Press the REPEAT button twice during Programmed playback to activate Repeat All (all the tracks in
the program will repeat continuously); "REP ALL" is displayed steadily on the LCD screen.
• Press the STOP ( ) button to stop the disc before it is finished.
• Press the STOP ( ) button while in the Stop mode to clear the program.
OPERATION (CONTINUED)
button to begin
28
2
Select the first track to be played back using
the SKIP button or
PROG. button again. Repeat this step to
program additional tracks (up to 20 tracks).
4
To skip forward or backward through the
programs, press the SKIP button
When the disc is through playing, it will stop.
3
, then press the
or .