LEXIBOOK RCD200DC Bedienungsanleitung Seite 23

AC OPERATION
To operate the unit using AC power, connect the small end of the AC/DC adapter
to the AC power jack on the rear of the unit and insert the plug into an
AC outlet having AC~230V, 50Hz only. The batteries are automatically
disconnected when the AC adapter is used.
CAUTION:
• When not using AC power, disconnect the AC/DC adapter from the wall outlet
and from the unit by pulling the plug (not the cord).
• Do not touch the AC/DC adapter with wet hands.
• Fully insert the plug without exposing any part of the blade.
• The socket-outlet shall be installed near the equipment and shall be easily
accessible.
POWER SOURCES (CONTINUED)
23