Bundling The Cables - Sony BRAVIA KDL-52Z5800 Bedienungsanleitung

4: Bundling the cables

~
• Do not bundle the mains lead/AC power cord
together with other cables.
5: Performing the initial
Set-up
1
Connect the TV to your mains socket/AC
power outlet.
2
Switch ENERGY SAVING SWITCH on
(page 10).
3
Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
6
GB
You can also
install the cable
holder here. (After
installation, you
will not be able to
remove it.)
4
Follow the instructions on the screen.
Satellite Auto Tuning: Confirm that the
tuning settings are the same that your
satellite settings.
Digital Auto Tuning: When you select
"Cable", we recommend that you select
"Quick Scan" for quick tuning. Set
"Frequency" and "Network ID" according
to the information supplied from your
cable provider. If no channel is found
using "Quick Scan", try "Full Scan"
(though it may take some time).
For a list of compatible cable providers,
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
Programme Sorting: Changes the order
of analogue channels stored in the TV.
1
Press F/f to select the channel you
want to move to a new position, then
press .
2
Press F/f to select the new position
for the channel, then press
Eco Preset: When you select "Yes", the
"Eco" settings are changed into
recommended values to reduce power
consumption.
~
• You can also tune channels manually.
.