Usb Devices - Clarion CZ301E Benutzerhandbuch & Installationshandbuch

DISC Player
Problem
Another disc is already loaded.
Disc cannot be
There is an object installed inside the
loaded.
unit.
Compact disc is dirty.
Sound skips or is
Compact disc is heavily scratched or
noisy.
warped.
Sound is bad when Condensation may form on the internal
power is first turned lens when the car is parked in a humid
on. place.

USB Devices

Problem
The USB device has been
inserted with wrong direction.
USB device cannot
be inserted.
The USB connector is broken.
The USB device is damaged.
USB device is not
recognized.
Connectors are loose.
No sound heard with
No MP3/WMA file is stored in the
the display "No File"
USB device.
shown.
Sound skips or is MP3/WMA files are not encoded
noisy. properly.
Bluetooth
Problem
Cannot pair the The device does not support the
Bluetooth enabled profiles required for the system.
device with the car The Bluetooth function of the
audio system. device is not enabled.
The microphone is not correctly
The audio quality
positioned.
is poor after
connection with a
Bluetooth-enabled
The Bluetooth reception is poor.
device.
Cause
Eject the disc before loading the new one.
Remove the object inside the unit.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with power on.
Cause
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
Cause
Use another device to connect.
Refer to the user manual of the device for how to
enable the function.
Adjust the position of the microphone.
For example, stick the microphone onto the
dashboard where close to the driver.
Move the device closer to the car audio system or
remove any obstacle between the device and the
system.
Measure
Measure
Measure
20