Installation - Batteries; Handle; Controls; Switching The Looky+ On And Off - Rehan Looky+ Bedienungsanleitung

5 Installation – batteries
1. Remove the lid from the battery compartment by pressing down on the arrow
and moving the lid in the direction of the arrow.
2. Place the first battery at the back of the battery compartment.
3. Now place the second battery.
Note: charge the batteries before using your Looky+! See the
charging instructions on page 12.

6 Handle

The handle of the Looky+ is closed on delivery. You can use the Looky+ with the
closed handle by placing it directly on the text. When you extend the handle you
can use the Looky+ like a magnifier. You now have the possibility to view objects or
read texts.
It is also possible to use the Looky+ as an aid during writing. To do so you will need
to extend the handle fully. When you now press the handle flat to the surface of
the table, the screen will rise to an angle. The space underneath the Looky+ that is
created in this way can be used to aid you during writing.

7 Controls

7.1 Switching the Looky+ on and off

 To switch the Looky+ on, keep button 1 pressed for 1 second. You will hear a
low pitched tone followed by a high pitched tone. The screen is now active.

To switch the Looky+ off, keep button 1 pressed until you hear a high pitched
tone followed by a low pitched tone. The screen of the Looky+ will darken and
the device will switch off.