Advanced Settings - Z Button; Internal Memory Of The Looky - Rehan Looky+ Bedienungsanleitung

7.5.2 Advanced settings – Z button
With the Z button you can adjust the brightness of the screen. By pressing the Z
button you will lower the screen brightness by 20% - by doing so you will hear a
sound that decreases in pitch. The lowest screen brightness is 20%, when you press
the Z button once more the screen brightness will go back to 100% - when doing so
you will hear a sound that increases in pitch. The Looky+ has 5 possible screen
brightness settings: 100% - 80% - 60% - 40% - 20%.

8 Internal memory of the Looky+

The Looky+ stores the following settings in its memory when switched off and on:

The reading mode that was used last (with exception of the full colour mode
without lighting – instead of this mode, the Looky+ will start up in the reading
mode that was used last before selecting the full colour mode without lighting).

Whether the sound notifications are switched ON or OFF.
 The selected brightness of the screen.