Glossary - Philips 15 pf 9936 Bedienungsanleitung

Video recorder or DVD keys
.
MODE
Ÿ ı
VCR
∫
Y
DVD
· ¢ Ê Æ
∆
ª Å
` ù Ó ¤
SMART ACTIVE SMART
-
ª
CONTROL
MENU
+ +
MUTE
"
[ P
- -
%
OK
RADIO
∏
PC TV
1 2 3
4 5 6
7 8 9
0
Á
Ë

Glossary

EasyLink: Digital link between the set and the video recorder which allows a direct transfer of
certain information such as channel setting or programming.
PIP (Picture in Picture): Superimposed window that displays a small picture in the main picture.
In PC mode you can display an image from the TV or other appliance (e.g. DVD or video recorder)
in a small window.
RGB signals : These are the three video signals, Red Green Blue, which make up the picture.
Using these signals improves picture quality.
S-VHS signals : These are 2 separate Y/C video signals from the S-VHS and Hi-8 recording standards.
The luminance signals Y (black and white) and chrominance signals C (colour) are recorded
separately on the tape.This provides better picture quality than with standard video (VHS and 8
mm) where the Y/C signals are combined to provide only one video signal.
NICAM sound : Process by which digital sound can be transmitted.
System : Television pictures are not broadcast in the same way in all countries.There are different
standards: BG, DK, I, and L L'.The SYSTEM setting (p. 6) is used to select these different standards.
This is not to be confused with PAL or SECAM colour coding. Pal is used in the majority of
European countries, Secam in France, the CIS and the majority of African countries.
The United States and Japan use a different system called NTSC.The inputs EXT1 and EXT2 are
used to read NTSC coded recordings.
16:9 : Refers to the ratio between the length and height of the screen.
Wide screen televisions have a ration of 16/9, conventional screen TV sets have a ration of 4/3.
Most of the audio and video equipment from our range of products
can be operated with the remote control of the TV.
The remote control is compatible with all video recorders using the RC5
standard and all DVDs using the RC6 standard.
& Press the
key to select the required mode :
MODE
recorder) or .The remote control indicator lights up to display
DVD
the selected mode. It switches off automatically after 20 seconds if
left idle.The remote control automatically returns to TV mode.
é The following keys are operational, depending on the equipment :
b
standby,
·
recording,
¢
fast rewind,
Ê
stop,
Æ
play,
∫
fast forward,
∆
pause
%
VCR timer,
c
DVD : subtitling language
H
menu,
cursor navigation and adjustments,
validation,
OK
09
digit keys,
@ P # programme selection,
e
audio selection.
d
OSD menu,
(video
VCR
13