English (Original Instructions); Technical Data - DeWalt XR LI-ION DCMHT563 Bersetzt Von Den Originalanweisungen

EngLIsh
HEDGE TRIMMER
DCMHT563
Congratulations!
You have chosen a D WALT tool. Years of experience,
e
thorough product development and innovation make
D WALT one of the most reliable partners for professional
e
power tool users.

Technical Data

Voltage
Type
Battery type
Blade strokes (no load)
Blade length
Blade gap
Blade break time
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN60745:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used
to compare one tool with another. It may be used for a
preliminary assessment of exposure.

WARNING: The declared vibration and/or noise
emission level represents the main applications
of the tool. However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration and/or noise emission may
differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when
the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise
such as: maintain the tool and the accessories, keep
the hands warm (relevant for vibration), organisation
of work patterns.
26
EC-Declaration of Conformity
Machinery Directive
OUTDOOR NOISE DIRECTIVE
Hedge Trimmer
DCMHT563
DCMHT563
V 18
DC
D WALT declares that these products described under
e
1
Technical Data are in compliance with:
Li-Ion
2006/42/EC, EN60745-1:2009 + A11:2010; EN60745-2-
15:2009 + A1:2010
min 1400
-1
2000/14/EC, Hedge trimmer, Annex V
cm 55.8
DEKRA Certification B.V.
mm 25
Meander 1051 / P.O. Box 5185
s <1
6825 MJ ARNHEM / 6802 ED ARNHEM
kg 2.9
Netherlands
Notified Body ID No.: 0344
dB(A) 79.5
LPA (measured sound pressure level) 79.5 dB(A), K=4.1 dB(A)
dB(A) 90.5
dB(A) 3.1
These products also comply with Directive 2014/30/EU and
m/s 2 <2.5
2011/65/EU. For more information, please contact D
m/s 2 1.5
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf
of D WALT.
e
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
17.02.2016
Level of accoustic power according to 2000/14/EC
(Article 13, Annex III):
Uncertainty = 3 dB(A)
LWA (guaranteed sound power) 94 dB(A)
WARNING: To reduce the risk of injury, read the
instruction manual.
WALT at
e