Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Product Overview
Magnet
Status of Indicator 1
Green light lit for 3s then go off
Red light flashes
Red light lit
Green light lit
Status of Indicator 2
Green light lit
Blue light flashes
Note: Please refer to the installation and dismounting instruction
manual to learn how to install and dismount an iPad. Or you can
click the below link to see the detailed illustration of installation
and dismounting. https://www.inateck.com/kb02003
How to power on/power off the KB02003
Powering on: Flip open the iPad protective case. The power
indicator will lit green and go off in 3 seconds. The keyboard turns
on automatically. (keyboard powers on through auto-induction)
Powering off: Close the case with keyboard. Keyboard powers off
automatically.
How to pair an iPad
Step 1: Install iPad and Power on the keyboard
Step 2: Press fn + delete keys simultaneously. Indicator 2 will flash
blue, which means the keyboard is under Bluetooth pairing mode.
Axis (capable of spinning for
a maximum 135° )
Micro-B charging port
Indicator 1
Indicator 2
Meaning
KB02003 powers on
Low battery, requires charging
Charging, turns green when battery is full
Full battery
Meaning
Upper case locked
Under Bluetooth pairing mode, waiting for
pairing, light goes off when paired successfully
Step 3: On the iPad, select Settings- Bluetooth- On.
Step 4: The iPad will display "inateck KB02003" as an available
device.
Step 5: Select "inateck KB02003" on the iPad.
Step 6: Indicator 2 goes off, which means the keyboard has been
paired with iPad successfully.
Note:
A. After you successfully pairing the keyboard for the first time, the
KB02003 would reconnect your iPad automatically in 3 seconds
next time you flip open it, saving your trouble in manual
reconnection.
B. If you need to frequently detach your iPad from the keyboard
case, you may turn off Bluetooth on your iPad accidentally.
And the next time, your iPad won't reconnect KB02003
automatically. To reconnect, please follow the below steps.
1) Delete all Bluetooth pairing record related to KB02003 on
your iPad
2) Turn off Bluetooth on iPad
3) Follow 'How to pair an iPad' to connect.
C. If iPad reminds: Connection Unsuccessful, Make sure 'Inateck
KB02003' is turned on and in range. Please follow the below
steps to reconnect.
1) Delete all Bluetooth pairing record related to KB02003 on
your iPad
2) Turn off Bluetooth on iPad
3) Follow 'How to pair an iPad' to connect.
D. How to restore factory for KB02003
Press fn + shift (left) + backspace three keys simultaneously.
If the above steps don't help, please reach us through email
support@inateck.com. We'll come to your help timely.
Keyboard backlight Guide
1) Press
+
to adjust brightness
2) Press
+
to change the backlight colors(there are
7 backlight colors)
3) When the battery is below 20%, backlight turns off
automatically.
4) The backlight only works when the keyboard is paired with
your iPad.
Functions Keys
Note: if you want to use Caps Lock Key in normal to switch the
case of alpha Characters, please follow the steps to change the
iPad settings:
Find General-Keyboard-Hardware Keyboard: TURN OFF Caps Lock
and Switch to/from Latin
Home
Siri
Virtual keyboard
Play / Pause
Volume down
Copy
Cut
Switch APP
Note: press and hold the cmd key to see shortcuts in any app that
supports them.
Decrease
Increase
Screenshots
Search
Switch language
Previous track
Next track
Mute
Volume up
Lock
Paste
Select all
Search
Switch language
Werbung
