Conceptronic CUPS1200 Handbuch Seite 3

English
When in AVR mode, it will display as
below. And the mark
every 1 second.
When in off charging mode, it will
display as below.
Note: the output voltage always is
displayed as "000" in off charging mode.
 Load level definition
Load level
will flicker
Load bar Indication
0%~25%
25%~50%
50%~75%
75%~100%
When in battery mode, it will display
as below. And the mark
flicker every 1second.
Note: If I/P-V<40V，input voltage
will display "000"
When in fault mode, it will display as
below. "FAULT" character and "0"
character only.
will