Maintenance - Conceptronic CUPS1200 Handbuch

English
 Enter the following serial No. to install software: 511C1-01220-0100-478DF2A
 After the software is successfully installed, the communication with UPS has
been established and a green icon will appear in the system tray.
 Double-click the icon to use the monitor software (as above).
 You can schedule UPS shutdown/start-up and monitor UPS status through PC.
 Detail instructions please refer to the e-manual in the software.
Check
monitoring software.

Maintenance


I. General
The UPS is virtually maintenance free: take care of proper environmental
conditions and keep air inlets-outlets free of dust.
II. Fuses
If the AC input fuse is defect, be sure it is replaced by a compatible fuse from the
same make and type.
Never short circuit batteries. When working with batteries, remove watches, rings
and other metal objects, and only use insulated tools.
III. Batteries
Read all safety rules before replacing the battery.
When replacing the batteries, use batteries with exactly same specifications.
"DDC WEBSITE" from time to time to get the latest version of