Wiseup WIFI31 Handbuch Seite 6

How to check if remote view function works?
1. Exit the "BVCAM" APP.
2. Back to the WIFI or WLAN setting page on your phone or mobile device, exit your phone or
mobile device from the current WIFI network, enroll your phone or mobile device in another
WIFI hotspot, or you can turn off the WIFI or WLAN function, enable your mobile network data
instead.
3. Launch the "BVCAM" APP again. If the camera shows "Online" on the "Live video" page, it
means the remote view setup is successful and the camera has entered into WAN mode. Both
blue and red indicator lights will remain solid. You can go ahead to view live video or record
video remotely.
[Note]:
If the camera shows "Device Offline", it means the remote view setup failed and you need to
reset the camera (See VIII) and set up all over again.
V. Motion Detection Recording Setup
>> Please make sure that the camera is added to the APP in LAN or WAN mode before you