Control Panel; Package Content; Positioning The Device And Commissioning - witeg Wisd CF-10 Bedienungsanleitung

www.witeg.de
 Acceleration and breaking time lower than 15 seconds.
 For 12 x 0,2-/0,5-/1,5-/2,0 ml tubes.

3.2 Control panel

MODE button
OPEN button

4 Package content

quantum

5 Positioning the device and commissioning

1. Follow especially the safety instructions marked with following
symbol:
2. Remove the package carefully.
3. If there are any unexpected transport damages, please inform your forwarder and your
costumer service.
4. Remove perhaps soiling and package material and other items in the centrifugal
chamber.
5. Before you connect the device with the electrical outlet, please let some time laps until
the device is acclimatised.
6. Make sure that you follow all safety instructions.
7. Connect the device with the power outlet and Turn on the Main Switch.
8. The Air hole is closed with rubber plug for shipment at factory. Remove the plug for use.
9. Push the "Open" button to open the door and check the rotor for abnormality. And, put
the sample tube of same weight for symmetry.
10. Press strongly the Door (Lid) so that it is completely closed with the Electronic Safety
Lock.
witeg Labortechnik GmbH, CF-10 Table Top Centrifuge
Rotation lamp
Illuminated LCD
1 CF-10 Table Top Centrifuge
12 0.2-/0.5- ml PCR tube Adaptor
1 power supply curt
1 operating manual
13
Timer lamp
SV
PV
Jog-Shuttle knob
denomination