If unexpected sound, smell or smog is generated by the device, pull out the main plug and
contact the manufacturer or your supplier immediately.
Disconnect the power supply plug before cleaning or maintenance.
If you use radiation or contaminated samples the responsibility is only up to you.
Use this device only if you read the whole safety instructions.
This device should only used by persons who are familiarized with safety instructions made
for laboratories.
Pay attention that no liquid reach the controller or inward of the capsule.
You have to keep the device clean if you want to get a longer life of it.
Wear corresponding protective work clothing during the usage.
All circuits and electrotechnical components are
necessary that only
Pull out the power cable if you didn't want to use the device for a longer time.
It is important that the device stands up on a horizontal, stabile and firm subsurface to avoid
vibrations.
Make sure that the device can not slip away.
To avoid heat congestion or fires make sure that there is enough space for air circulations.
Avoid direct solar radiation.
Do not use the device near highly combustible materials.
Do not set the device outdoors.
It is superiorly to set the device in a good illuminated place to avoid accidents engendered
by handling errors.
To set the device in wet or dusty places could cause overheating, short circuits or fires.
Reparations and amendments should only made by
Contraventions exclude the warranty.
Do not use this device in areas with potentially explosive atmosphere.
3 Product description
3.1 Key features
Only 57 dB at maximum speed.
Maintenance-free Motor.
High performance (ca. 12.200 x g).
Compact and durable design.
Simplest operation by patented Jog-Shuttle controller.
Illuminated LCD with power bar graph.
witeg
authorized personal repair the device.
12
witeg
owned technology. In fact of this it is
witeg
authorized people.
witeg Labortechnik GmbH, CF-10 Table Top Centrifuge
www.witeg.de