Turning The Iron On; G Ironing - Leifheit Air Active M Bedienungsanleitung

F

Turning the iron on

1. Preparation
Stand the Active Ironing Board on a firm, level
surface. Unwind the cord on the Ironing Board
and carefully move the frame forwards.
The Active Ironing Board folds out and can be
set to the required position. It can then be tip-
ped forward to stand on the floor.
The active ironing board is gradually height-
adjustable (max. height approx. 75-100 cm) and
allows ironing while standing or sitting.
To adjust the height, take hold of the ironing
board with both hands. Lift the ironing board up
slightly and pull the lever with one hand.
(The ironing board has to be slightly raised for
safety reasons, i.e. to prevent the lever from
being activated accidentally.) Only when you hear
the ironing board lock into place is it secure.
Engage the cable holder [6] into the guide of the
shelf. The cable holder can be moved sideways
to the desired position.
With the help of the adjustable foot caps [10]
it is possible to compensate for irregularities
in the ground (rotate the adjustable foot caps
clockwise or counter-clockwise).
Commercially available steam stations only may
be used with the iron rest. To ensure trouble-free
ironing, the steam station must be correctly posi-
tioned on the iron rest [7] in a horizontal position.
Plug the mains plug of the Active Ironing Board
into a wall socket.
Plug the mains plug of the Active Ironing Board
into a wall socket. Thus providing a power supp-
ly to the steam station.
The Active Ironing Board is ready for use.
G
Ironing
2. Suction and
extraction function
The suction fixes the fabric on
the table and thus counteracts the formation of
creases. Set the function switch [4] to the suction
and steam extraction function.
The simultaneous steam extraction reduces
and prevents condensation and should be swit-
ched on at all times to remove excess steam
from the active ironing board and the inside of
the housing.
The steam extraction enables the steam to
penetrate the fi bres better, thus saving time and
improving ironing results.
The steam suction an extraction function keeps
the Active Ironing Table dry and helps to dry
fabrics even whilst they're being ironed.
It cools the laundry faster due to the fresh air
flowing inwards, protects the fabric and provi-
des long-term crease protection.
3. Blower function
The blower function provides
crease-free ironing results with
delicate fabrics and items of clothing resting on
a cushion of air.
It protects the delicate tissue and enables
laundry items to cool off faster by the through-
put of air, thereby preserving the fabric quality.
4. Dry ironing
without steam
For dry ironing without steam,
the blower functions can remain switched off.
17