Casals CCS190L Bedienungsanleitung Seite 4

- Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
- If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
- Ensure that the resulting sparks not become dangerous,
for example, that they don't reach people or ignite
flammable substances.
- If it's necessary, use temperature-proof gloves.
- Use clamps or a vise to secure the object to be worked
in place. The work will be safer if both hands are free to
control the tool.
- Before using the appliance check the working speed
shown in the disc/ tool is equal or greater than the
appliance's speed.
- Before using the appliance check the disc / tool
dimensions are compatible for this appliance.
- Before using the appliance ensure that the disc / tool is
properly fixed in place.
- Do not touch any of the appliance's moving parts while
it is operating.
- Protect yourself from contact with and the inhalation
of dust created by sanding wood and metal surfaces
and surfaces coated with lead paint. Use protective
equipment that complies with the appropriate health and
safety regulations.
- Exercise precaution after employing the stop operation
on the appliance as the tool will continue moving from the
effect of its own mechanical inertia.
Power tool use and care
- Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
- Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/or
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
- Store idle power tool out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
4
- Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
- Fully unroll the appliance's power cable before each use.
- Check the position of power cables before
commencing work ensuring they are well away from
the work area.
- Do not use the appliance if the parts or accessories
are not properly fitted.
- Do not use the appliance if the accessories or
consumables attached to it are defective. Replace them
immediately.
- Use the appliance handle/s, to catch it or move it.
- Unplug the appliance from the mains before replacing
any accessory.
- Unplug the appliance from the mains when not in use
and before undertaking any cleaning task.
- This appliance is for professional use.
- This appliance is intended for adult use. Ensure that
this product is not used by the disabled, children or
people unused to its handling.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
- Do not expose the appliance to extreme temperatures.
- Take special care about discs and tools, they may be
stored fixed on the appliance and used according to the
manufacturer's instructions.
- Do not use separator or reducing bushings, adapters
to fix the discs / tools they are not directly compatible
with the appliance.
- Keep the appliance in a dry, dust-free place, out of
direct sunlight.
- Always check the workpiece before operation and
remove any obstructions such as nails, staples, screws,
string, rags, cloths and other debris.
- Do not use the appliance on any part of the body of a
person or animal.
- Let the appliance running with no load for 30 seconds
in a safe position. If you notice serious vibration or other
defects stop the appliance immediately. Then check the
problem and /or proceed as we describe on Anomalies
and Repair clause.
Service
- Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
- Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.