Velleman VTLAMPLC Bedienungsanleitung Seite 3

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VTLAMPLC! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Assembly
• Take out all the parts from the package box. Fix the shade (1) to the lamp arm (2) with the screw (3) and
triangle knob as in fig. 1.
• Fix the clamp (5) tightly on the table as in fig. 2.
• Insert the lamp post (6) into the clamp hole as in fig. 3.
• Put the cord (7) through the arm and pull it out at the end (8) as in fig. 4. Adjust the shade to the desired
position and tighten the triangle knob.
3. Clamp Assembly
• Rotate the knob screw in anti-clockwise direction to open to the desirable position as in fig. 5.
• Fix the clamp tightly on the table by rotating the knob screw in clockwise direction as in fig. 6.
4. Cleaning the lamp
Unplug the power cord from the mains before cleaning the lamp. Wipe the lamp with a soft cloth.
VTLAMPLC
VTLAMPLC – MAGNIFYING LAMP
3 VELLEMAN